Large Drone Motors & UAV Motor Units

Choose drone motors for industrial and heavy-lift UAVs. Compare open-propeller motors and integrated electric ducted fans by thrust, installation envelope and electrical demand. For FPV and hobby builds, use a motor and propeller guide for your frame size.

Last reviewed

Drone motor classes by thrust

The motor delivers torque. Static thrust comes from the full motor and propeller or fan assembly. Use the bands below to narrow your search, then compare configurations at the same operating condition.

Scroll to see all columns →

Indicative static thrust per assembly
Thrust bandTypical configurationWhat to compare
Below 5 kgfCompact open-propeller outrunners for FPV and small UAVsFrame clearance, propeller diameter, motor KV and battery cell count.
5 to below 60 kgfOpen-propeller units for commercial multirotorsMatched propeller, controller current, voltage and thrust at the intended duty cycle.
60 kgf and aboveLarge open-propeller assemblies and integrated ducted unitsMounting envelope, cooling and available test curves. Hobbywing publishes up to 108 kgf for one M13842 motor and propeller configuration. Yuntu’s ducted units span 60 to 1,000 kgf in published maximum thrust.

The bands overlap in practice. Published static thrust can depend on the propeller or fan, voltage, airflow, altitude and allowable run time.

Yuntu drone motor size chart

These specifications describe complete electric ducted fan units. Use the product pages for installation dimensions and available performance data.

Scroll to see all columns →

Yuntu YTF series specifications
ModelMaximum thrustMotor powerPublished diameterTakeoff speed
YTF-6060 kgf22 kW0.60 mFan diameter4,000 rpm
YTF-200200 kgf50 kW1.2 mFan diameter2,500 rpm
YTF-500550 kgf165 kW1.7 mOuter diameter1,600 rpm
YTF-10001000 kgf600 kW1.6 mFan diameter2,700 rpm

Maximum thrust and takeoff speed describe published operating points. Ask for continuous thrust and cooling limits for your mission.

How much thrust does each drone motor need?

For a level hover with equal load sharing, divide aircraft weight by the number of lift units to estimate vertical thrust per unit. A 120 kg aircraft with six equally loaded units needs about 20 kgf per unit just to balance weight in hover.

Check the rest of the mission

Assess climb, transition and control margin separately. If the project requires continued operation after a unit fails, verify the remaining units and control authority for that case.

Match KV, voltage and RPM

Use KV and voltage to screen open-propeller motor combinations. For an integrated fan, use the published speed and performance data, then check the aircraft’s bus voltage, controller limits and cooling.

Integrated ducted units and open-propeller motors

An open-propeller motor lets the integrator choose and validate a motor, controller and propeller combination. An integrated ducted unit matches the motor, fan and duct as an assembly. The duct surrounds the blades and can help with compact packaging. Some installations can use the exhaust airflow for powered lift.

Request a configuration review

Share your takeoff mass, lift layout, target duty cycle and installation envelope.

Request specs or a quote

Export availability is subject to applicable controls and end-use review. See China’s 2026 Announcement No. 49 and Yuntu’s export policy.

Drone Motors FAQ

What is the largest drone motor available?

Compare the complete thrust-producing assembly and its test conditions. A bare motor is specified by torque, speed and power. Yuntu’s largest listed ducted fan unit has a maximum thrust of 1,000 kgf for the complete assembly.

How much thrust does each drone motor need?

In level hover with equal load sharing, total vertical thrust balances aircraft weight. Actual unit requirements depend on the installed geometry, control authority, takeoff and climb demand, environmental conditions and any applicable failure cases.

What does KV mean on a drone motor?

KV is the motor speed constant in revolutions per minute per volt under no-load conditions. It helps match an open-propeller motor to its supply and propeller. Loaded operating speed depends on the propeller, voltage, controller and operating point.

What size motor do I need for a heavy-lift drone?

Start with takeoff mass, lift layout and mission, then compare the installed thrust, diameter, electrical demand and cooling envelope. Use continuous performance for sustained segments and check peak thrust against its allowable duration.

Why do drone motors get hot?

Electrical and mechanical losses generate heat. A propeller that draws more torque, high current or restricted airflow can raise the motor temperature. Check the motor and controller limits for the expected duty cycle and cooling conditions.

Do drone motors need a matched ESC and propeller?

An open-propeller motor needs a compatible electronic speed controller and propeller. For an integrated ducted fan, check the supplied components, controller and cooling interfaces, and the requirements for installation on the aircraft.

How much does a large drone motor cost?

Cost depends on the thrust and duty cycle, supply voltage, cooling, included controller and hardware, documentation and order quantity. Share your mission and intended supply scope for a configuration-specific quote.